custom carbon fiber - Manufacturers, Factory, Suppliers from China

After data comparison, it is obvious that there is a gap between the mechanical properties of carbon fiber and carbon fiber composite materials, but even so, the carbon fiber pipe made of carbon fiber composite material far exceeds the pressure bearing capacity of steel pipe. custom carbon fiber, Design Composite, Custom Carbon Fiber Card, Card Holder Carbon Fiber,Carbon Fiber Penny Board. When the surface moisture is completely dry, you can design and make the driving path of the spray gun according to the shape of the carbon fiber tube to carry out spray painting. When painting, pay attention to the evenness of the paint. Generally, the carbon fiber tube has to be sprayed three times: topcoat, varnish, and surface clear paint, and each time it is sprayed, it must be baked once. During the whole process of painting, it is found that there are paint particles or dents on the surface of the carbon fiber tube, and it must be polished or compensated until the surface is smooth, so that the painting process of the carbon fiber tube is completed. The product will supply to all over the world, such as Europe, America, Australia,Holland, Anguilla,Uruguay, Congo.Carbon Fiber Forming: Carbon fiber sheets made of epoxy glue are not thermoset (thermoformable) - the finished sheet cannot be heated and bent to maintain the bent shape. Carbon fiber laminate does not stretch easily like plastic. You can get very insufficient permanent index of refraction in an orientation above high fever, but because of this difficulty, we do not strongly recommend the application. Molded pieces are possible, but the carbon fiber fabric must be stored in the mold and the epoxy glue introduced prior to the heating/drying process.

Related Products